fits model: 250r, Trail, Boss. make: Polaris. year: 1985–1988.

( Manufacturer Part Number: 4010065 ), ( Type: Negative Battery Cable )
The **Polaris 4010065 85-88 Trail Boss 250R Battery Solenoid Cable (AP195)** is a precision-engineered replacement cable designed specifically for the **1985 through 1988 Polaris Trail Boss 250R** models, ensuring reliable electrical connectivity between the battery and the starter solenoid. This high-quality cable is crafted from durable, **tinned copper conductors** wrapped in a robust, **weather-resistant vinyl jacket**, which protects against abrasion, moisture, and corrosion critical factors for maintaining consistent performance in demanding off-road conditions. The **AP195 designation** indicates its compatibility with the solenoid system, where even a minor failure in the wiring can prevent the engine from cranking, leaving riders stranded. This cable features a **secure crimped connection** at both ends, ensuring a tight, corrosion-free fit to the battery terminal and solenoid, reducing voltage drop and preventing loose connections that could lead to intermittent starting issues. Ideal for both maintenance and replacement scenarios, this cable is a straightforward yet essential upgrade for owners seeking to restore or enhance the electrical reliability of their Trail Boss 250R. Its straightforward installation requiring minimal tools makes it a practical solution for DIY enthusiasts and professional mechanics alike, ensuring that the engine starts reliably, even in the harshest environments.
### **Pros and Cons of buying a Polaris 4010065 (85-88 Trail Boss 250R Battery Solenoid Cable AP195)**
#### **Pros:**The Polaris 4010065 battery solenoid cable (AP195) is a direct replacement part designed specifically for the 1985 1988 Trail Boss 250R ATV. Here are the key advantages of purchasing this part:
1. **OEM Quality and Fit** This is an original equipment or high-quality aftermarket replacement designed to match the exact specifications of the factory part. It ensures a proper fit without modifications, reducing the risk of installation issues.
2. **Reliable Performance** The solenoid and wiring are built to handle the electrical demands of the Trail Boss 250R s ignition system. A faulty or worn-out cable can cause starting problems, so replacing it with a known-good part improves reliability.
3. **Easy Installation** Since it is a direct replacement, the cable should be straightforward to install, requiring minimal tools and time. Most users can replace it themselves with basic mechanical skills.
4. **Prevents Electrical Issues** Over time, the battery solenoid cable can degrade, leading to intermittent starting problems, weak battery drainage, or even complete failure to crank the engine. Replacing it proactively can prevent these issues.
5. **Cost-Effective Solution** Compared to labor costs for professional installation, buying and replacing the cable yourself is often more affordable. It also avoids potential downtime if the issue were left unresolved.
6. **Compatibility with Other Systems** While specific to the 85-88 Trail Boss 250R, the AP195 designation suggests it may also fit similar Polaris models from that era, making it a versatile upgrade if you own multiple ATVs.
7. **Durability** High-quality cables are typically made from reinforced wiring and corrosion-resistant materials, which helps extend the lifespan of the electrical components in your ATV.
---
#### **Cons:** While this part is generally reliable, there are a few potential drawbacks to consider before purchasing:1. **Age of the Part** The 85-88 Trail Boss 250R is an older model, and finding a genuine OEM part may be difficult. Some aftermarket versions might not be as durable as the original, though reputable sellers mitigate this risk.
2. **Potential Counterfeit Parts** If purchasing from an unknown or untrusted seller, there is a risk of receiving a counterfeit or low-quality replica. Always buy from established dealers or verified online marketplaces to avoid this.
3. **Wiring Corrosion or Damage** Even with a new cable, if the surrounding wiring harness or battery terminals are corroded or damaged, the new cable may not resolve the issue. A thorough inspection of the entire electrical system may be necessary.
4. **Limited Availability** Since this is a niche part for an older ATV, stock may be limited, and lead times could be longer than for more modern vehicles. Prices might also be higher due to lower demand.
5. **Skill Dependency** While installation is generally simple, inexperienced users might struggle with wiring or securing the cable properly. Improper installation could lead to short circuits or loose connections.
6. **No Warranty on Used/Aftermarket Parts** Some aftermarket parts may not come with a warranty, leaving you without recourse if the cable fails prematurely. OEM parts typically include warranties, but these are often limited.
7. **Additional Costs** If the issue persists after replacing the cable, further diagnostics (e.g., checking the starter, battery, or ignition switch) may be required, adding to the overall cost.
---
### **Conclusion:**The Polaris 4010065 battery solenoid cable (AP195) is a practical and cost-effective solution for restoring proper electrical function to your 1985 1988 Trail Boss 250R. Its OEM compatibility and ease of installation make it a strong choice for addressing starting issues. However, potential drawbacks such as part availability, quality variability, and the need for careful installation must be considered.
If your ATV is experiencing intermittent starting, weak battery drainage, or failure to crank, replacing the solenoid cable is a logical first step. For best results, pair this replacement with a check of the battery, starter, and wiring harness to ensure the issue is fully resolved.
---
### **Recommendation:**- **Buy from a reputable seller** (e.g., official Polaris dealers, trusted online marketplaces like RockAuto, or specialized ATV parts suppliers) to ensure authenticity and quality.
- **Inspect the surrounding components** (battery, terminals, wiring) before and after installation to rule out other potential causes of electrical failure.
- **Follow installation instructions carefully** to avoid damaging the new cable or other systems.
- **Consider purchasing a spare** if you frequently encounter electrical issues, as solenoid cables can wear out over time.
- **If the problem persists after replacement**, consult a mechanic to diagnose other possible causes (e.g., faulty starter, ignition switch, or ground connections).
For most users, the benefits of this replacement outweigh the risks, making it a worthwhile investment in maintaining your Trail Boss 250R s reliability.
This battery cable is in very good condition and shows normal signs of wear. Removed From: 1986 Polaris Trail Boss 250R with miles. Change your mind, don't need the part, or just wan't what you are looking for. 85-88 Polaris Trail Boss 250R OEM Battery Solenoid Cable 4010065 AP195.